Welcome to the
ticket to the moon webshop



Everything you need to know:


The TTTM Hanging Kit lets you set up your hammock indoors or wherever you find concrete or stone walls.

The kit includes:

2 x Hangers
2 x Bolts
2 x Rope Slings
1 x Installation Instruction

What you require for set-up:

1 x drill
1 x 10 mm (3/8”) drill bit
1 x 17 mm wrench
1 x hammer

If you want to install the display on wooden structures, please replace the bolt with screws that are suited for wooden material.



1) Try to find the right distance of two walls– usually a distance from 2,7 - 3 m is perfect without the need to add additional rope

2) Check the wall by tapping and knocking and see if the wall is sturdy enough and not just a hollow thin layer of ply-wood…

3) Choose any height from 1,3 m and higher, depending on the distance of your hangers. Make sure to install the anchors higher if they are further away than 3 m – otherwise you either don’t have the 30° angle for your hammock or you will touch the floor ;)

4) Drill a hole in concrete or stone wall with a 10 mm (3/8”) boring head. Check the length according to the Bolt included in the Kit. Clean the hole with a brush or blow residual dust out with a straw

5) Gently hammer the bolt with the hanger installed until only the nut of the bolt is left

6) Screw the nut until it is tightened.

7) Use the Rope Slings provided to attach your hammock or add additional Rope or Webbing to increase the distance. Don’t attach the aluminum Carabiner directly to the stainless-steel Display because it may damage the Carabiner. Start with gently sitting inside your hammock to see if the hangers are installed safely and secure.